BIS ISI Certificate for Countersunk Flat Head Screws With Type H or Type Z Cross Recess Part-1

Countersunk Flat Head Part-1 for the Indian Market: An Insight

Countersunk flat head screws with Type H or Type Z cross recess are the fasteners that are designed to sit flush with the surface after installation. These screws have a special head and drive pattern that helps in easy tightening and a neat finish. The value of the Indian fasteners market is around ₹93,000 crore in 2025, showing strong demand for the product. Along with this, the screws and bolts market alone reached about ₹17,400 crore in 2024 and is expected to grow steadily in the coming years. Manufacturers and suppliers need to follow applicable Indian quality and safety standards because of the growing demand. So, BIS ISI certification is mandatory for these screws to be legally sold in India.

Key Highlights 

What is the Required Certification for Countersunk Flat Head Screws Part-1 in the Indian Market?

BIS ISI Certification is mandatory for Countersunk Flat Head Screws With Type H or Type Z Cross Recess Part-1 to get approved for sale in India. An overview of the steps, documents, and regulatory requirements is given below.

BIS ISI Certificate 

The BIS ISI certificate confirms that these screws have been checked for quality, strength, and performance. Compliance with the Indian standard (IS 7485 (Part 1):2018) means that the screws are safe to use and perform reliably in regular commercial applications. The countersunk flat head screws are commonly used for various purposes like construction, electrical fittings, furniture, and manufacturing. So, maintaining consistent quality is very important. The ISI mark on the product builds trust among buyers and users, showing that the screws comply with Indian regulations and standards. This is why the BIS ISI certification is mandatory for Countersunk Flat Head Screws With Type H or Type Z Cross Recess Part-1 to sell in India.

What will happen if you are selling without BIS ISI Certification? Click here to know more.

How to Get the BIS ISI License for Countersunk Flat Head Screws With Type H or Type Z Cross Recess Part-1 in India?

Required Documents for a BIS ISI License for Countersunk Flat Head Screws Part-1

Manufacturers and suppliers should provide correct documents for obtaining a BIS ISI license for Countersunk Flat Head Screws with Type H or Type Z Cross Recess Part-1. The following are the documents that the manufacturers need to submit to the BIS portal to get the license:

1. Legal address proofs of the factories
2. Product specification
3. Details of raw material, machinery, and testing equipments
4. Details of QC Staff and other basic details of the factory
5. Lab test reports of the product
6. Main Application Form V
7. ISI Application Fee
8. Appointment of an AIR (Authorized Indian Representative) in case you are a foreign manufacturer

Note: You can appoint Brand Liaison as your AIR

Process for BIS ISI Certification for Countersunk Flat Head Screws Part-1

Check the following BIS ISI certification process to obtain the certification. The following steps of the process ensure that the countersunk flat head screws meet the required Indian quality standards for sale in the Indian market:

1. Prepare Documents
2. Submit Application
3. Factory Inspections by BIS Officials
4. Product Testing
5. Grant of BIS ISI Certification

Certification Guidelines For Indian Manufacturers

• Must have proper manufacturing and testing capabilities for the product.
• Apply through the BIS Manak portal with all required documents.
• Product samples are tested in a BIS-accredited lab.
• A license is granted if test results and documents meet the Indian standards set by the Bureau of Indian Standards.

Certification Guidelines For Foreign Manufacturers

• Must appoint an Authorized Indian Representative (AIR) as per BIS guidelines.
• Submit application with Factory Test Report (FTR).
• BIS conducts factory inspections and selects samples for testing.
• A license is issued after successful testing and compliance with standards.

Get the complete guidebook for the BIS ISI Mark License for more information. 

Certification Guidelines For Indian Importers

• Not eligible to apply directly; only manufacturers can obtain BIS ISI certification.
• Must coordinate with the manufacturer to get the certificate.
• Keep a copy of the license to avoid customs issues.
• Can act as AIR if authorized by the manufacturer.

Certification Guidelines For Traders

• Cannot apply for BIS ISI certification directly.
• Certification must be obtained by the manufacturer.
• Maintain a copy of the license for compliance.
• Can act as AIR if authorized.

Certification Guidelines For Online Sellers

• Not eligible to apply directly; only original manufacturers can apply.
• Must obtain the BIS ISI certificate copy from the manufacturer.
• Required to present certification for e-commerce compliance.

Visit here to check your eligibility for Countersunk Flat Head Screws for the Indian market now!

Brand Liaison: Assisting Businesses with Seamless Compliance

Brand Liaison supports manufacturers and importers of Countersunk Flat Head Screws with Type H or Type Z Cross Recess Part-1 by simplifying the BIS ISI certification and compliance process in India. With expert knowledge of Indian regulatory requirements, Brand Liaison helps businesses navigate documentation, testing, and approvals with ease, ensuring a smooth and timely certification journey.

• Practical compliance solutions
• Cost-effective guidance, clear regulatory insights, and end-to-end support
• Avoid delays and stay compliant with BIS standards.
• Professional expertise and proven industry experience

For hassle-free BIS ISI certification for Countersunk Flat Head Screws With Type H or Type Z Cross Recess Part-1, Brand Liaison is the right compliance partner. Contact Brand Liaison today for expert assistance and smooth regulatory support.