aajadi ka amrit mahotsav
May I help you ?

ISI / BIS Certification for Polyester Partially Oriented Yarn (POY)



ISI / BIS Certification is mandatory for

Polyester Partially Oriented Yarn (POY)

IS Standard : IS 17262:2022

Polyester yarn that comes under the larger category of polyester industrial yarn is known as partially oriented yarn, or POY. It is a synthetic fiber that is created by polymerizing a chemical substance called polyethylene terephthalate (PET). 

Polyester Partially Oriented Yarn, or POY for short, is a multifilament yarn that is produced by only partially stretching it. It is the main type of yarn made from melted and spun polyester chips. The textile and clothing industry relies heavily on polyester partly oriented yarn because of its strength, versatility, and compatibility for a wide range of fabric kinds. These yarns are also used in warp knitting and draw warping of textiles. 

Polyester POY is in high demand since it may be used in a variety of textile and industrial applications. It is an essential raw material for the creation of polyester staple fibers, which are used to make non-woven fabrics, textiles, apparel, and home furnishings. Seasonal fluctuations, economic situations, and fashion trends also have an impact on the demand for polyester POY. 

Under IS standard IS 17262:2022, all polyester partly oriented yarn (POY) is now required to be part of the ISI Certification Scheme.

The requirements for each category of polyester partly oriented yarns (POY) meant for various end uses are described in this standard. In addition to meeting the standard's environmental requirements, the polyester POY must adhere to the performance and construction characteristics. The yarn must also be free of noticeable defects, and the standard's testing must be carried out in a facility that is staffed and equipped appropriately, adhering to the guidelines.
  
Without the ISI Mark, this product cannot be marketed, imported, or exported into the Indian consumer market.

 

About ISI / BIS Certification

Indian Standards Institute, or ISI was renamed the Bureau of Indian Standards (BIS) in 1987. The official mark that the Bureau of Indian Standards provides for manufacturers of various goods is the ISI Mark. It is used to indicate compliance with Indian standards (IS) set by the Bureau of Indian Standards (BIS) and has been used as a conformity marking for industrial products. Manufacturers received permission from BIS to use the ISI Mark on items that comply with relevant Indian requirements through the product certification program. 

Only manufacturers (domestic or foreign) who produce the finished product will be awarded ISI Certification. This will not be given to any product importers, traders, dealers, or distributors.

 

Documents Required for ISI / BIS Certification

The following documentation is required to get an ISI certification:

  • Main Application Form V
  • Address Proof of Manufacturing Unit
  • Details of Manufacturing Process
  • Test Report of products

For more detailed information, please click here.

 

Process of ISI / BIS Certification

There are two approaches for Indian manufacturers to become certified with the ISI Mark:

  • Regular Procedure
  • Simplified Procedure 

 

Regular Procedure

With the possible exception of cases deemed "All India first," which might take up to 180 days, the licensing procedure is expected to be finished in 120 days. This timeline starts on the day the application is received, assuming that at different points in time the documentation, unit assessment, and product conformance are all deemed acceptable.

Step 1: Manufacturing Unit Customization in Compliance with Applicable Indian Standards

  • Identifying the applicable Indian Standard
  • Establishing in-house testing facilities as per the Standard's requirements

Step 2: Submission of the Application Form

  • Preparing an Internal Test Report for the product by the relevant Indian Standard
  • Compiling all necessary documents
  • Completing the Online Application Form
  • Online payment of application fees directly to BIS
  • Submitting hard copies of the Application Form with all enclosures to the relevant Branch Office (BO) of BIS

For more detailed information, please click here.

 

Simplified Procedure

This is a much faster process than the standard procedure. After a factory inspection is deemed satisfactory and the initial evaluation establishes that the sample complies with the applicable Indian Standard(s), the license application process is expected to be finished in 30 days.

Step 1: Adapting the Manufacturing Unit to Comply with the Relevant Indian Standard

  • Identifying the applicable Indian Standard
  • Establishing in-house testing facilities to meet the Standard's requirements

Step 2: Sample Testing

  • Obtaining the necessary certificate for raw materials (Material Test Certificate - MTC)
  • Conducting product sample testing at a BIS-recognized testing laboratory

For more detailed information, please click here

 

ISI Mark Certification Process for Foreign Manufacturers

The process of obtaining ISI Mark Certification for Foreign Manufacturers typically includes the following steps:

Step 1: Application

  • Compile all the required documents.
  • Submit the documents along with the Application Fee.
  • An Application Number will be allotted.
  • Scrutiny of the Application will be conducted within a specified time frame.​

Step 2: Query Raised (If Any)

  • If any documents are missing or there is non-compliance, you will be informed.
  • You need to submit a reply within the given timeframe.

​For more detailed information, please click here.

 

Why choose Brand Liaison?

Brand Liaison provides helpful support for achieving ISI Mark Certification. Among our offerings are:

  •  Expert guidance
  •  Streamline process
  • Comprehensive support
  • Cost-effective solutions
  • Time efficient

Please click here to get in contact with our team of specialists for a deeper explanation of the paperwork and steps needed to get ISI Mark Certification.

 


Back
Free Consultation !
×

Get Free Consultation

connect with us