ISI / BIS Certification for High Density Polyethylene (HDPE) woven beds for vermiculture

Bedding and sleeping surfaces composed of woven materials manufactured of high density polyethylene (HDPE), a form of thermoplastic polymer, are referred to as HDPE woven beds. These beds are well-known for their robustness, resilience to environmental elements, and versatility in design. They are frequently utilized in untamed and outdoor settings where standard bedding might not be appropriate because of weather exposure. 

The creation of high-quality vermicompost, which is prized for its nutrient-rich and organic matter content, and the establishment of earthworm populations are both supported by HDPE weaved beds, which are essential in creating a proper and regulated environment for vermiculture. These beds enable vermicomposting, which is an important aspect of organic farming that reduces waste and enriches the soil while also increasing agricultural productivity and environmental consciousness.

The market for HDPE weaved beds has increased because to a mix of sustainable agriculture, environmental consciousness, and the advantages of vermicompost. As more people and farming businesses realize the benefits of vermicomposting for enhancing soil quality and encouraging environmentally friendly farming methods, it is anticipated that this demand will only increase.

Under IS 15907: 2010, all high-density polyethylene (HDPE) woven beds for vermiculture are now required to be part of the ISI Certification Scheme. 

This standard describes the structural requirements as well as extras for weaving beds composed of high-density polyethylene (HDPE) that are used in vermiculture to produce compost meant for use in agriculture. 

Without the ISI Mark, this product cannot be marketed, imported, or exported into the Indian consumer market.

About ISI / BIS Certification

Indian Standards Institute, or ISI was renamed the Bureau of Indian Standards (BIS) in 1987. The official mark that the Bureau of Indian Standards provides for manufacturers of various goods is the ISI Mark. It is used to indicate compliance with Indian standards (IS) set by the Bureau of Indian Standards (BIS) and has been used as a conformity marking for industrial products. Manufacturers received permission from BIS to use the ISI Mark on items that comply with relevant Indian requirements through the product certification program. 

Only manufacturers (domestic or foreign) who produce the finished product will be awarded ISI Certification. This will not be given to any product importers, traders, dealers, or distributors.

Documents Required for ISI / BIS Certification

The following documentation is required to get an ISI certification:

• Main Application Form V
• Address Proof of Manufacturing Unit
• Details of Manufacturing Process
• Test Report of products

For more detailed information, please click here.

Process of ISI / BIS Certification

There are two approaches for Indian manufacturers to become certified with the ISI Mark:

• Regular Procedure
• Simplified Procedure 

Regular Procedure

With the possible exception of cases deemed "All India first," which might take up to 180 days, the licensing procedure is expected to be finished in 120 days. This timeline starts on the day the application is received, assuming that at different points in time the documentation, unit assessment, and product conformance are all deemed acceptable.

Step 1: Manufacturing Unit Customization in Compliance with Applicable Indian Standards

• Identifying the applicable Indian Standard
• Establishing in-house testing facilities as per the Standard's requirements

Step 2: Submission of the Application Form

• Preparing an Internal Test Report for the product by the relevant Indian Standard
• Compiling all necessary documents
• Completing the Online Application Form
• Online payment of application fees directly to BIS
• Submitting hard copies of the Application Form with all enclosures to the relevant Branch Office (BO) of BIS

For more detailed information, please click here.

Simplified Procedure

This is a much faster process than the standard procedure. After a factory inspection is deemed satisfactory and the initial evaluation establishes that the sample complies with the applicable Indian Standard(s), the license application process is expected to be finished in 30 days.

Step 1: Adapting the Manufacturing Unit to Comply with the Relevant Indian Standard

• Identifying the applicable Indian Standard
• Establishing in-house testing facilities to meet the Standard's requirements

Step 2: Sample Testing

• Obtaining the necessary certificate for raw materials (Material Test Certificate - MTC)
• Conducting product sample testing at a BIS-recognized testing laboratory

For more detailed information, please click here

ISI Mark Certification Process for Foreign Manufacturers

The process of obtaining ISI Mark Certification for Foreign Manufacturers typically includes the following steps:

Step 1: Application

• Compile all the required documents.
• Submit the documents along with the Application Fee.
• An Application Number will be allotted.
• Scrutiny of the Application will be conducted within a specified time frame.​

Step 2: Query Raised (If Any)

• If any documents are missing or there is non-compliance, you will be informed.
• You need to submit a reply within the given timeframe.

​For more detailed information, please click here.

Why choose Brand Liaison?

Brand Liaison provides helpful support for achieving ISI Mark Certification. Among our offerings are:

•  Expert guidance
•  Streamline process
• Comprehensive support
• Cost-effective solutions
• Time efficient

Please click here to get in contact with our team of specialists for a deeper explanation of the paperwork and steps needed to get ISI Mark Certification.