BIS Certification for Telescopic Ball Bearing Drawer Slides in India

Introduction

Telescopic ball bearing drawer slides are widely used in furniture, kitchen cabinets, office storage systems, wardrobes, tool cabinets, as well as various other applications where smooth and reliable drawer movement is required. For manufacturers and businesses who are supplying these products in India, understanding the applicable BIS requirements is all the more important before manufacturing, importing, or selling them in the Indian market.

This article explains in detail the applicable standard, QCO requirements, testing, BIS certification process, documents, marking requirements, and key considerations for manufacturers and importers of telescopic ball bearing drawer slides in India.

What Are Telescopic Ball Bearing Drawer Slides?

Telescopic ball bearing drawer slides are hardware components that are fitted to drawers in order to allow them to open and close smoothly. They use ball bearings between sliding members in order to reduce friction as well as support controlled movement.

These slides are commonly used in:

• Kitchen cabinets
• Office furniture
• Wardrobes and storage units
• Home furniture
• Tool cabinets
• Industrial storage systems
• Other furniture and cabinetry applications

Depending on the design and application, drawer slides can differ in size, load capacity, extension type, material, finish, and construction. Because these components directly affect the movement, load-bearing ability, and durability of a drawer, their performance needs to be absolutely consistent. IS 17954:2023 provides the applicable technical requirements for telescopic ball bearing drawer slides, as per BIS requirements in the Indian market.

Is BIS Certification Mandatory for Telescopic Ball Bearing Drawer Slides in India?

Yes. Telescopic ball bearing drawer slides are covered by the QCO and are subject to mandatory BIS certification compliance in India.

The Telescopic Ball Bearing Drawer Slide (Quality Control) Order, 2023 requires the specified product to conform to IS 17954:2023 and carry the BIS Standard Mark under the applicable Scheme-I certification framework. This means businesses should not treat BIS certification as merely an optional quality certification when the product falls within the scope of the QCO. It is surely a mandatory requirement for sales and imports of these products in India.

For a manufacturer or importer planning to supply drawer slides in India, the product's exact specifications as well as intended use should be checked against the latest applicable QCO provisions and exemptions before shipment or sale in the Indian market.

Which BIS Standard Applies to Telescopic Drawer Slides?

IS 17954:2023 establishes requirements relating to important product characteristics, including materials, dimensions, finish as well as functional performance. BIS also describes the standard as covering major quality parameters such as load capacity, extension types, materials, ball bearing quality and durability.

The standard therefore provides a technical basis for checking whether a telescopic ball bearing drawer slide is suitable for consistent as well as reliable use.

What Does IS 17954:2023 Cover?

IS 17954:2023 is not limited to the appearance of the drawer slide. It generally addresses characteristics that influence the actual performance of the product. Depending on the applicable product configuration and requirements, important areas mainly include:

• Load-bearing performance
• Extension type
• Dimensions
• Materials
• Ball bearing quality
• Durability
• Finish and workmanship
• Functional performance
• Resistance to deformation and operational stresses

The BIS product information confirms that the standard addresses major parameters including load capacity, extension types, materials, ball bearing quality as well as durability. Manufacturers should therefore review the complete standard and applicable BIS product manual rather than assuming that conformity can be established only through dimensional checks of the product.

Does IS 17954:2023 Cover Soft-Close Drawer Slides?

The scope of the Indian standard needs to be checked carefully for the particular product configuration. The existing standard does not cover requirements for soft-closing drawer slides. Therefore, businesses manufacturing or importing a specialised soft-close configuration should verify the product's exact scope along with applicable regulatory requirements before relying on IS 17954:2023 alone for compliance.

What Is the Telescopic Ball Bearing Drawer Slide Quality Control Order?

The Ministry of Commerce and Industry has issued the "Telescopic Ball Bearing Drawer Slide (Quality Control) Order, 2023," which is effective twelve months after its publication in the Official Gazette. 

• This order specifically relates to telescopic ball-bearing drawer slides and mandates compliance with the Indian Standard IS 17954:2023.
• According to the order, telescopic ball-bearing drawer slides must bear the Standard Mark issued by the Bureau of Indian Standards under Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.
• Exceptions to this order include goods or articles manufactured domestically for export and micro and small enterprises, as defined under the Micro, Small, and Medium Enterprises Development Act, 2006, until twelve and nine months, respectively, from the date of publication of this notification.

For more details, you can read the complete BIS QCO on telescoping ball bearing drawer slides in India. 

Who Needs BIS Certification for Drawer Slides?

The requirement for a BIS Certification for drawer slides is particularly relevant to businesses that are involved in manufacturing or supplying notified telescopic ball bearing drawer slides in India. Here is who needs it:

Indian Manufacturers

An Indian manufacturer who is producing covered telescopic ball bearing drawer slides for the Indian market needs to comply with the applicable BIS certification requirements before using the Standard Mark on the product.

Foreign Manufacturers

Foreign manufacturers who are exporting the notified drawer slides to India should evaluate the applicable BIS certification requirements for their manufacturing facility and product. Certification should be addressed before commercial shipments are planned for the Indian market.

Importers/Traders/Distributors

Importers and traders cannot directly get a BIS license as it will be granted only to the manufacturer of the product. However, they can request a copy of the same from the latter and ensure continued compliance during audits, customs, and inspections. 

If you do not know whether you need this license in the Indian market, check your eligibility for a BIS certification today with Brand Liaison’s free CYE tool.

What is the BIS Certification Process for Telescopic Ball Bearing Drawer Slides in India? 

The BIS certification process generally involves both documentation as well as technical evaluation steps such as the following.

Step 1: Identify the Applicable Standard

Confirm that the product falls under IS 17954:2023 and that the QCO applies to the specific product.

Step 2: Preparation of the Documents

The applicant should prepare the documents as per the prescribed checklist. For foreign manufacturers, an Authorized Indian Representative (AIR) must be appointed to proceed with the application. 

Step 3: Submission of the Application 

The applicant needs to submit the application to the BIS authorities to initiate the certification process. 

Step 4: Factory Inspections by BIS Officials

The BIS officials will visit the factory to conduct factory inspections to review the manufacturing processes and quality assurance as per BIS Standards. 

Step 5: Product Testing

The product sample will be tested in BIS-accredited laboratories, as per relevant standards. The product sample will be decided (chosen) by a BIS officer during the inspection. 

Step 6: Grant of BIS ISI Certification

After verifying the details, credibility, and audit report, the BIS ISI certification will be granted to the applicant. 

What are the Documents Required for BIS Certification?

The exact document requirements generally depend on the applicant, manufacturing arrangement as well as the certification process. Commonly required information may include:

• Legal address proofs of the factories
• Product specification
• Details of raw material, machinery, and testing equipments
• Details of QC Staff and other basic details of the factory
• Lab test reports of the product
• Main Application Form V
• ISI Application Fee
• Appointment of AIR (Authorized Indian Representative) in case you are a foreign manufacturer

Note: You can appoint Brand Liaison as your AIR. Being the best BIS ISI certification consultant in India, we offer AIR support for foreign manufacturers.

BIS Marking Requirements for Telescopic Drawer Slides

Once certification is granted, the manufacturer must follow the applicable BIS marking requirements to ensure continued compliance.

The QCO requires covered telescopic ball bearing drawer slides to bear the BIS Standard Mark under Scheme-I. The marking should be applied in the manner prescribed by the applicable BIS requirements. Businesses should not print or use the ISI/BIS Standard Mark merely because an application has been submitted.

It is important to note that the BIS certification and permission to use the Standard Mark are not the same as simply testing a product. The manufacturer must obtain the applicable BIS licence before representing the product as BIS-certified.

BIS Certification for Imported Telescopic Drawer Slides

Importers who are bringing telescopic ball bearing drawer slides into India need to check compliance before placing an order or arranging shipment for the Indian market.

Here is what a practical pre-import checklist for telescopic ball bearing drawer slides generally includes:

1. Confirm whether the product falls within IS 17954:2023.
2. Check whether the applicable QCO covers the intended product.
3. Verify the overseas manufacturer's BIS license.
4. Check the exact product variants as well as specifications.
5. Review the latest applicable exemption notifications.
6. Confirm marking and packaging requirements.
7. Complete the required compliance steps for selling in India.

This is particularly important because an importer may face delays if compliance is considered only after the goods have already been manufactured or shipped in the Indian market. Taking help from experts and top BIS certification consultants can help in managing smooth compliance.

Common BIS Compliance Mistakes to Avoid

Manufacturers and importers can face unnecessary delays when they approach BIS compliance. Common mistakes generally include:

• Using the wrong Indian Standard.
• Continuing to rely on the older QCO information.
• Assuming that all drawer slides automatically fall under the same scope.
• Ignoring differences between product variants.
• Testing a sample that does not represent the production model.
• Inconsistent product specifications as well as technical documents.
• Using the BIS/ISI Mark before obtaining the licence.
• Ignoring current exemptions or amendments.
• Starting compliance only after goods are ready for shipment for India.

A better approach is to determine the regulatory requirement first, map the product to the correct standard, review the testing requirements, and then prepare the BIS application. Brand Liaison, a top BIS certification consultant in Delhi, India, helps with the entire compliance roadmap, reducing errors and delays.

Complete BIS Certification Assistance from Brand Liaison India

Brand Liaison supports manufacturers, importers, as well as businesses with end-to-end BIS certification for products entering the Indian market. For telescopic ball bearing drawer slides, our team assists with BIS applicability checks, IS 17954:2023 requirements, product testing, technical documentation, application filing, as well as certification procedures. We have more than a decade of experience in helping businesses simplify compliance for the Indian market, offering cost-effective and reliable support for smooth market entry and long-term functioning.

Brand Liaison helps businesses understand regulatory requirements, prepare the right documentation, and navigate the BIS process in an efficient manner. Whether you are manufacturing locally or importing drawer slides into India, Brand Liaison can provide practical compliance support. Connect with us today. 

Conclusion

Telescopic ball bearing drawer slides are an important category of furniture hardware, and businesses supplying notified products in India need to take BIS compliance seriously. The key requirement is IS 17954:2023, while the applicable regulatory framework is the Telescopic Ball Bearing Drawer Slide (Quality Control) Order. 

For manufacturers and importers, the safest approach is basically to determine the exact product scope, review the current QCO and applicable exemptions, complete the required testing as well as obtain the necessary BIS approval before commercial supply in the Indian market.

If you are planning to manufacture, import or sell telescopic ball bearing drawer slides in India, getting the product's BIS applicability checked at the beginning can help avoid unnecessary compliance and shipment-related issues.